"Some images on this page are computer-generated representations of the product and may differ from the actual product. Colors, textures, and other details may not be accurately represented in the images. Please refer to the product description and specifications for more information."
Wood Dust Processor
A Revolutionary Dust Processor
Because of the principal contradiction between dusty air flow and filtration, traditional dust collectors are struggling with filter clogging or bad air quality. Most of the dust collectors are very loud, bulky and difficult to maintain. This has been a long-standing pain for woodworkers.
To solve this problem, the Harvey team of engineers spent
over 7 years of research and study, to develop an unprecedented Dust Collector, the Gyro Air® G-700 Wood Dust Processor. The G-700 Gyro Air® Wood Dust Processor incorporates a unique, patented technology to separate dust particles from the air and capture them before they enter the filters.The G-700 uses the new Axial Centrifugation Technology (called Gyro Air® Technology), to spin the air/dust stream up to 4,000 RPM and generate a super strong centrifugal force (over 100 times gravity) to separate the dust from the air and collect it in two dust bins hidden internally in the unit.
The G-700 collects 99.7% of the dust particles before the air reaches its HEPA filters. This not only means much less cleaning of the filters, but that the airflow and static pressure will remain much more constant during operation. In addition, the air emission cleanliness level from the filters can reach an unbeatable 0.05 mg/cubic meter (50% better than the European Standard of 0.1 mg/cubic meter). The entire extraction system is aerodynamically optimized with extraordinary running efficiency, so it can save up to 50% in energy costs.
The Gyro Air® technology and its unique aerodynamic design allow the G-700 Gyro Air® to run at an incredibly low noise level of 61 to 72 dBA, depending on which speed you run the Gyro Air ... yes, it is a variable-speed machine that allows you to adjust the airflow to suit your needs. The G-700 is powered and controlled by a SIEMENS industrial 2HP motor and SIEMENS V20 Variable Frequency Driver for 24/7 applications. In addition, the Gyro Air® G-700 is equipped with a built-in Dust-Bin monitor and a Remote Control Key. Its fully enclosed housing is short enough to fit under most benches, and it has heavy-duty casters to allow it to move as needed. The two dust bins are sealed when in use but are then easily accessed through a panel on the side of the unit, and they roll out for easy emptying (and you can use disposal bags to take out wood chips).
Very efficient. Easy to set up.
Powerful, quieter than my old bag and cyclone system, remote works great.
really well designed. does a great job. like the adjustable air flow feature
Makes woodworking so much more fun. Quiet. Works great. Expensive but worth it.
I replaced a Laguna high-quality machine, and this makes it look and perform like it was a little Tinkertoy. I have been doing a lot of study and review of Harvey Woodworking Products, and I'm a big fan. I'm not paid or sponsored (Harvey, I'm available if you want). I've purchased thousands of their products, and I've never had a complaint. The suction and ability to control the volume of that is great, clean out is easier than any machine I've had in the past and its accurate full indicator light is spot in. They give you all you need for set up including full size and good quality tools standard. This is a great machine.
This thing is amazing.
Great product. I will definitely recommend to anyone.
I am a hobbyist woodworker and have been working on various size projects. After acquiring G-700 I completed two key projects - a dining table and a cutting board. Both of these projects required variety of tools like table saw, router and CNC machines. The dust collection has been great, able to control the suction power is a fantastic feature which helps to keep the noise down. Since I am alone working in the shop I really don't have multiple machines running so I don't need to turn it up so I can keep the noise level to a comfortable level. While it I still early to know the machine well but have been very satisfied so far.
In the lowest setting I can hear my music clearly and with 10 ft of flex hose it is adequate for most table saw tasks. Adjusting the dial gets it up a bit louder .....but should be more than powerful enough to keep my 20 inch planer area clean. I have a small shop.....I haven't done any blast gates or solid piping. I really haven't gained any space in my personal upgrade....but I'm working on tucking it away a bit more. The challenges in location are outwieghed by its quality and performance.
Just got it set up so have not used it a lot yet. I still need to install some pipes to run the length of my shop to the processor. I did hook up the G700 direct to my table saw and to my planer and it performed great. The vacuum is strong and easily handled the chips.
I like the variable speed control and the remote on/off control. The noise level is much lower than I expected given the amount of air that it moves. Customer support is great. Many thanks to Vincent in Customer Logistics for helping arrange freight delivery to my shop door.
My dust collection game is about to go next level.
If dust collection is on your Christmas list, give me a call to discuss the Harvey G700. I love this beast! I can save you a few bucks, which is always helpful this time of year.
If this little beast performs half as good as it looks I’ll be a happy camper lol... Big thanks to my buddy @pj_fetscher for coming down last night and helping me out with it (and with Zacapa XO.. there still some left)
Unboxing complete and the new G700 is in its new home!
Couldn’t be happier with my decision to upgrade the shop dust collection system with the G700 Dust Processor by @harveyindustriesintl . It’s everything it’s marketed to be - quite, compact, well made and most all - powerful. I am very impressed with this machine.
Got these two monsters delivered today from @harveywoodworking . Only had time to unbox and move into the corner, but I can't wait till I start putting everything together and get to making some sawdust.
I recently purchased the G700. It was damaged in transit, and Danny at Harvey was very responsive and promptly shipped out a replacement part. The machine makes a huge difference for dust collection in my garage shop, especially at the bandsaw, which went from very poor dust collection to nearly zero dust escaping the collector. Where to place the unit in the garage took some pondering due to the placement of its hose connection, but the thing fortunately rolls easily on casters. I ultimately decided to rearrange the garage and put the G700 underneath an assembly table, leaving me with a much improved woodworking setup.
Customer service is fantastic. Danny and Sam spent what felt like all day helping me set up shipping receiving of my G700. They did a great job!
Harvey has been a wonderful company to deal with. I purchased a G700 and it ended up not being the right product for me, this was completely on my part of not doing my full research. I contacted Harvey with a full understanding I would need to pay shipping and a restocking fee. I had used the machine some in testing it out, they were still willing to work with me on a return. Knowing the large hit of return financially I would take I turned to sell local. Harvey was very helpful in letting the buyer transfer warranty. All phone calls and emails with Harvey were very prompt courteous and top notch. I have started to recommend them as a company to check out when people are researching woodworking equipment and dust collection. I was sad to see the G700 go, I loved its design, it just didn't fit my specifications.
I saw a review of Harveys table saw and got curious. I went to their site and ended up not only buying the table saw but I also got the dust processor. I worked with Samantha in customer service and she was very helpful. She was able to get me reduced shipping and a further discount because of the large order. Thanks Samantha. I am looking forward to receiving my machines and will post again after some sawdust therapy hours.
DID YOU BUY A G700? WE WANT TO HEAR FROM YOU! LET US KNOW HOW YOU LIKE THE DUST PROCESSOR, AND IF YOU NEED ANY ASSISTANCE WITH IT.