- Powered by Industrial Servo Motor; Same motors used in state of the art CNC machines that offers more power and more control.
- 2 Millisecond response time for Torque demand; 100x faster than most lathes, giving you power when you need it.
- Quick spindle stop.
- Forward and reverse turning.
- Digital RPM readout.
TURBO T40 Wood Lathe (stand not included)
$2,990.00
Specifications
| Maximum Swing Over Bed | 14" |
|---|---|
| Maximum Swing Over Banjo | 10" |
| Distance Between Centers | 24" |
| Spindle Motor Drive | Industrial Servo Motor system (Intelligent Motor) |
| Motor Power | 1HP, 220V, 50Hz(60HZ), 1Phase |
| Spindle Speed (variable) | 50-2800RPM（Low range); 75-4300RPM（High range） |
| Tool Rest Length | 12" |
| Tool Rest Post Diameter | 1" |
| Spindle Thread | 1-1/4" × 8 TPI UNS |
| Spindle Through Hole Dia | 1/2" |
| Spindle Taper | Morse Taper #2 |
| Tailstock Travel | 4" |
| Tailstock Quill Through Hole Dia | 3/8" |
| Tailstock Quill Outer Dia | 1-1/4” |
| Tailstock Quill Taper | Morse Taper #2 |
| Spindle Indexing | 24 positions |
TURBO T40 Wood Lathe (stand not included)
$2,990.00
description
- Premium Grade Cast Iron bed; Machined and ground for flatness and a smooth finish.
- Headstock spindle supported by 3 oversized ball bearings.
- Specially hardened alloy tool rest edge.
- Solid Steel, Foam-covered locking handles for all major locking points (headstock, tailstock, tool rest support.
- Forged and ground spindles.
- 90° Head stock swivel; Allowing for large diameter pieces.
- 24 position spindle indexing system with tool-less locking.
- Baked finish for clean look and excellent durability.
Specifications
| Maximum Swing Over Bed | 14" |
|---|---|
| Maximum Swing Over Banjo | 10" |
| Distance Between Centers | 24" |
| Spindle Motor Drive | Industrial Servo Motor system (Intelligent Motor) |
| Motor Power | 1HP, 220V, 50Hz(60HZ), 1Phase |
| Spindle Speed (variable) | 50-2800RPM（Low range); 75-4300RPM（High range） |
| Tool Rest Length | 12" |
| Tool Rest Post Diameter | 1" |
| Spindle Thread | 1-1/4" × 8 TPI UNS |
| Spindle Through Hole Dia | 1/2" |
| Spindle Taper | Morse Taper #2 |
| Tailstock Travel | 4" |
| Tailstock Quill Through Hole Dia | 3/8" |
| Tailstock Quill Outer Dia | 1-1/4” |
| Tailstock Quill Taper | Morse Taper #2 |
| Spindle Indexing | 24 positions |
