The GYRO AIR G-800 Pro Industrial Dust Processor represents Harvey’s most advanced dust processor with the largest filter surface area (86 sq ft, 27% more than G-700 Pro), largest fine dust box (4 gallons, 150% larger), adjustable inlet position for overhead ducting, smart jet-pulse automatic filter cleaning, full touch screen interface, WiFi and Bluetooth connectivity, and the most robust construction at 650 lbs.

GYRO AIR is Harvey’s patented Axial Centrifugation Technology that separates 99.7% of dust particles from the airflow before reaching the filter. This drastically reduces filter clogging, ensures longer filter life, consistent suction performance, and delivers emission concentration less than 0.05 mg/m³.

Yes, the GYRO AIR G-800 Pro Industrial Dust Processor requires connection to a compressed air line (customer provided) to operate its smart jet-pulse automatic filter cleaning system. Minimum air pressure required is 0.8 MPa (115 psi) with operating pressure of 0.6 MPa (87 psi).

The GYRO AIR G-800 Pro Industrial Dust Processor operates at an ultra-quiet 60-71 dBA, depending on speed setting. Users report being able to carry on normal conversation while standing next to the running machine. Some even need to check if the machine is on while wearing hearing protection.

The GYRO AIR G-800 Pro Industrial Dust Processor is ideal for professional and industrial woodworking environments, woodworking clubs, schools, and shops that run multiple machines simultaneously, use fine-dust producing equipment like drum sanders and CNC machines, have long duct runs or overhead ducting configurations, and require 24/7 operation capability.

The GYRO AIR G-800 Pro Industrial Dust Processor requires 200-240VAC, single-phase, 50/60Hz power with a 20A circuit breaker. The VFD generates high-frequency leakage current, so a Type B residual current circuit breaker (RCCB) is recommended to prevent tripping.

Yes, the GYRO AIR G-800 Pro Industrial Dust Processor’s inlet is adjustable. It comes side-mounted by default but can be relocated to the top for overhead ducting configurations. This reduces CFM loss from extra bends and provides more flexible installation options.

The GYRO AIR G-800 Pro Industrial Dust Processor weighs 650 lbs net and 805 lbs gross with packaging. A forklift is recommended for transportation. The machine ships in a heavy-duty wooden crate and includes heavy-duty swivel casters for mobility once installed.

The GYRO AIR G-800 Pro Industrial Dust Processor measures 51 x 29-1/2 x 55-1/8 inches. Position the machine at least 18 inches from walls for proper motor heat dissipation. Ensure adequate space for accessing the dust bin, dust box, filter box, and control panel for routine maintenance.

The touch screen is divided into three sections: Running Status Display (shows motor speed, filter status, operating mode), Operation and Control (start/stop and filter cleaning buttons), and Parameter Setup (configure start/stop modes, running modes, delayed stop, dust cleaning parameters, and system settings including WiFi, Bluetooth, language, and updates).

Flow Cruise mode maintains constant motor power output (adjustable 500-2200W, default 2000W) for consistent performance. This intelligent speed control automatically adjusts RPM to maintain the set power level, ensuring consistent airflow even as conditions change.

The smart jet-pulse system uses compressed air to automatically clean the filters when the pressure differential exceeds the set threshold (adjustable 500-2000 Pa, default 1000 Pa). You can set it to clean during operation, only when stopped, or manual-only mode.

Delayed Stop keeps the GYRO AIR G-800 Pro Industrial Dust Processor running for a set time (default 10 minutes) after you press stop, allowing the system to clean residual dust from the air. Press the stop button twice within 1 second to override and stop immediately.

The GYRO AIR G-800 Pro Industrial Dust Processor offers two running modes: Speed Adjustment Mode lets you manually set motor speed between 2400-4500 RPM (default 4200 RPM). Flow Cruise Mode maintains constant motor power output between 500-2200W (default 2000W), automatically adjusting speed to maintain consistent airflow regardless of changing conditions.

Empty the main 33-gallon dust bin when 2/3 full for non-metal materials, or half full for metal dust. The 4-gallon fine dust box should also be checked regularly, especially when using sanders, drum sanders, or CNC machines which produce heavy fine dust.

Filter lifespan is approximately 1000-3000 hours depending on the working environment, including type of dust collected, particle density and size, and frequency of operation. The smart jet-pulse cleaning system extends filter life significantly.

Use an 8mm hex wrench to unlock the filter box door panel latch. Remove the six M6x16 screws holding the filter in place. Install the new filter and reassemble. Only use Harvey-approved filters to maintain performance and safety standards.

Daily: Check and empty dust bin and dust box as needed, use delayed dust cleaning at end of workday. Weekly: Wipe sealing strips clean. Periodically: Clean or replace filters when pressure drop alarm sounds, inspect power cords for damage, check grounding connections, and inspect for loose components or wear.

Both share the same 3HP motor, 1235 CFM max airflow, and core GYRO AIR technology. The GYRO AIR G-800 Pro Industrial Dust Processor offers: 27% more filter surface area (86 sq ft vs 68 sq ft) for 14% more real airflow at the tool, 150% larger fine dust box (4 gal vs 1.6 gal), adjustable vertical inlet for overhead ducting, smart jet-pulse automatic filter cleaning, full touch screen with WiFi/Bluetooth, and heavier construction (650 lbs vs 540 lbs).

More filter surface area means less airflow resistance, higher sustained CFM at your tools, less frequent filter cleaning, and better performance with fine-dust machines like drum sanders, jointers, and planers. The GYRO AIR G-800 Pro Industrial Dust Processor’s 86 sq ft filter allows it to “breathe” more freely and maintain suction better over time.

The GYRO AIR G-800 Pro Industrial Dust Processor’s adjustable vertical inlet accepts dust straight down from overhead ducting, providing gravity-assisted chip separation, smoother airflow with less turbulence, fewer obstructions and internal bends, better handling of large debris, reduced clogging, and more stable pressure readings across long duct runs.

Traditional cyclone collectors rely on gravity alone, achieving only about 60% separation efficiency before the filter. The GYRO AIR G-800 Pro Industrial Dust Processor uses GYRO AIR centrifugal technology to achieve 99.7% pre-filter separation, resulting in dramatically longer filter life, more consistent suction, cleaner air emission of 0.05 mg/m³, and ultra-quiet operation at just 60-71 dBA.

Do NOT collect: liquids, flammable or explosive dust, volatile gases, hazardous materials, combustible metals (aluminum, magnesium, or other highly reactive metals), or any potentially dangerous substances. The GYRO AIR G-800 Pro Industrial Dust Processor is designed for dry dust collection only.

Grounding is critical for electrical safety and static electricity prevention. The GYRO AIR G-800 Pro Industrial Dust Processor must be grounded via the grounding screw on the right side. Additionally, all ducting (metal and plastic) must be grounded to prevent static buildup that could ignite fine dust particles.

Only operate the GYRO AIR G-800 Pro Industrial Dust Processor in locations with fire suppression systems or where a fire extinguisher is readily accessible. An ABC-type dry chemical fire extinguisher is recommended for small wood shops. Empty collection bags frequently to prevent fine dust buildup. Avoid accumulation of fine dust on horizontal surfaces like overhead lights, electrical panels, or heaters. Ensure all equipment and ductwork is electrically grounded.

Access System Setup (C5) on the touch screen, select Network Connection, then choose your target WiFi from the available network list. WiFi connectivity enables system updates and future smart features.

Yes, the GYRO AIR G-800 Pro Industrial Dust Processor supports wired linkage mode. By modifying the electrical box with the Gyro Air Synchronized Control (sold separately), the start and stop of your dust source equipment automatically links to the dust processor. Contact Harvey customer service for installation instructions.

The included remote controls are pre-paired. To pair a replacement: disconnect power, open the rear cover, remove the receiver housing to expose the circuit board. Reconnect power, press the pairing button on the receiver (indicator light turns off), press the ON button on the remote (light blinks three times then stays lit). Reinstall the receiver housing and close the rear cover.

Harvey provides a two-year warranty from date of purchase. Defective parts will be repaired or replaced at no charge. The warranty does not cover normal wear and tear, consumable parts, abuse or misuse, lack of proper maintenance, use of non-genuine parts, unauthorized modifications, or damage from force majeure events.

Contact Harvey Industries International at 1-888-211-0397 or email info@harveywoodworking.com. Submit support tickets through harveyindustriesintl.freshdesk.com/support/home. Reference your serial number (located on the machine’s nameplate) for all inquiries.

The serial number is located on the machine’s nameplate. Record this number for warranty registration and keep it handy when contacting customer service, as it will facilitate rapid and effective support for your GYRO AIR G-800 Pro Industrial Dust Processor.