GYRO AIR G-700 Dust Processor for dust collection and extraction front view with control panel pressure gauge and 6 inch inlet

G-700

Name: Baby GYRO AIR G-200H The Hyper-Performance Shop Vacuum Processor
Brand: ESD: Dec.15
Price: 2690.0 USD
Availability: InStock

Wood Dust Processor

A Revolutionary Dust Processor

Because of the principal contradiction between dusty air flow and filtration, traditional dust collectors are struggling with filter clogging or bad air quality. Most of the dust collectors are very loud, bulky and difficult to maintain. This has been a long-standing pain for woodworkers.

To solve this problem, the Harvey team of engineers spent

over 7 years of research and study, to develop an unprecedented Dust Collector, the Gyro Air® G-700 Wood Dust Processor. The G-700 Gyro Air® Wood Dust Processor incorporates a unique, patented technology to separate dust particles from the air and capture them before they enter the filters.The G-700 uses the new Axial Centrifugation Technology (called Gyro Air® Technology), to spin the air/dust stream up to 4,000 RPM and generate a super strong centrifugal force (over 100 times gravity) to separate the dust from the air and collect it in two dust bins hidden internally in the unit.

The G-700 collects 99.7% of the dust particles before the air reaches its HEPA filters. This not only means much less cleaning of the filters, but that the airflow and static pressure will remain much more constant during operation. In addition, the air emission cleanliness level from the filters can reach an unbeatable 0.05 mg/cubic meter (50% better than the European Standard of 0.1 mg/cubic meter). The entire extraction system is aerodynamically optimized with extraordinary running efficiency, so it can save up to 50% in energy costs.

The Gyro Air® technology and its unique aerodynamic design allow the G-700 Gyro Air® to run at an incredibly low noise level of 61 to 72 dBA, depending on which speed you run the Gyro Air ... yes, it is a variable-speed machine that allows you to adjust the airflow to suit your needs. The G-700 is powered and controlled by a SIEMENS industrial 2HP motor and SIEMENS V20 Variable Frequency Driver for 24/7 applications. In addition, the Gyro Air® G-700 is equipped with a built-in Dust-Bin monitor and a Remote Control Key. Its fully enclosed housing is short enough to fit under most benches, and it has heavy-duty casters to allow it to move as needed. The two dust bins are sealed when in use but are then easily accessed through a panel on the side of the unit, and they roll out for easy emptying (and you can use disposal bags to take out wood chips).

1. What Are Air Watts and Why Do They Matter?

Air Watts (AW) measure the real aerodynamic cleaning power a vacuum system delivers at the intake. In simple terms, Air Watts show how effectively a machine converts motor power into useful air power — the actual force that pulls dust, chips, and debris into the hose and moves them through the system.

Static Pressure / Water Lift shows how hard the system can pull.

Airflow / CFM shows how much air the system can move.

Air Watts combine both into one system-level performance metric.

In common vacuum-industry terms:

The important point is that airflow and pressure must be measured at the same operating point.

This makes Air Watts different from motor horsepower or electrical input power. Horsepower tells you how much power the motor is rated to consume or produce mechanically. Air Watts tell you how much usable aerodynamic power actually reaches the cleaning path.

Think of it like two electric stoves with the same power rating. One wastes heat through poor design, while the other transfers heat efficiently and brings water to a boil much faster. The wattage on the label tells you how much energy goes in. The boiling performance tells you how much useful heat reaches the pot.

Vacuum systems work the same way. Motor horsepower is the input story. Air Watts are the real cleaning-output story.

2. What 550 Air Watts Means for the G-200H

For the Harvey BABY GYRO AIR G-200H, 550 Air Watts means serious aerodynamic power in a compact, mobile machine.

While ordinary shop vacuums and high-end dust extractors cap out between 150 to 300 Air Watts, the BABY GYRO AIR G-200H delivers a staggering 550 Air Watts.

That power matters most under load. Longer hoses, smaller nozzles, narrow crevices, packed debris, and textured surfaces all create resistance. With 550 Air Watts, the G-200H helps maintain strong pickup performance where weaker vacuums often fade — pulling dense sanding dust from workbench crevices, lifting chips from machine tracks, and extracting debris from seams, corners, and hard-to-reach areas.

Paired with Harvey’s Gyro Air Separation Technology, which separates up to 99.7% of dust and debris before it reaches the filter, the G-200H helps reduce filter loading and delay the suction loss caused by clogging.